I condensatori cilindrici sono al tantalio liquido (non solido ossia di quelli che scoppiano) altro segno di qualità e che non si è badato al risparmio. Lo strano è che su alcuni di questi condensatori il valore è in chiaro ( 27 uF 10 % 20 V.....) mentre su quelli a standard MIL vi è stampato un numero (normalmente di 5 cifre) e per il valore bisogna consultare delle tabelle.
I "data code" degli integrati sono 1982-1983 quindi secondo le regole le schede sono state assemblate prima del 1985 (1983-1985).
PRC 80
Re: PRC 80
# ARO 301/0 WS 19 Group # 15 Mario IK0MOZ
Re: PRC 80
Grazie Gabriele per la tua consulenza, scusa ritardo alla risposta.
Tramite un carissimo amico ( IZ2XGI ) ho i pezzi per la riparazione, cambio solo quello cerchiato o li cambio tutti ?
Cosa mi consigli ?
Grazie per la risposta e a presto.
MIchele HB9EDT
Tramite un carissimo amico ( IZ2XGI ) ho i pezzi per la riparazione, cambio solo quello cerchiato o li cambio tutti ?
Cosa mi consigli ?
Grazie per la risposta e a presto.
MIchele HB9EDT
HB9 EDT
Re: PRC 80
Ho trovato la sua batteria funzionante e ho riacceso il portatile Prc 80 e usato nell ottobre test ........
Radio stupenda, l unica pecca è che per aprire lo squelch ci vuole in tx la nota a 150 hz.
Radio stupenda, l unica pecca è che per aprire lo squelch ci vuole in tx la nota a 150 hz.
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
Iw5elc Emanuele
Re: PRC 80
Buongiorno Emanuele, sono ancora in alto mare con la scheda PS della mia PRC 80.
Non trovo nessuno disposto alla sostituzione dei componenti ed io non sono all'altezza di un intervento del genere.
C'é qualcuno del gruppo che vuol separarsi di questa apparecchiatura?
Mi piacerebbe ritirarla cosi' la mia PRC 80 potrà ritornare in funzione.
Fatemi gentilmente sapere.
Mille grazie e a presto risentirci.
Best 73 HB9EDT Michele
Non trovo nessuno disposto alla sostituzione dei componenti ed io non sono all'altezza di un intervento del genere.
C'é qualcuno del gruppo che vuol separarsi di questa apparecchiatura?
Mi piacerebbe ritirarla cosi' la mia PRC 80 potrà ritornare in funzione.
Fatemi gentilmente sapere.
Mille grazie e a presto risentirci.
Best 73 HB9EDT Michele
HB9 EDT
Re: PRC 80
Hello Michele,
I own a PRC80 with the same faulty PS Card as yours. To do a better service at the radio, I am working on a service cable to check the PS Card out of the radio. The hardest part is to find the green print connectors made by winchester connector.
The type coding for male print connector is: 600-1-17P
Type coding for female connector is: 600-1-17S
From time to time these connectors are available in brand new condition on ebay.
When cable is ready, I show picture here.
Cheers,
John
DL9QQ
I own a PRC80 with the same faulty PS Card as yours. To do a better service at the radio, I am working on a service cable to check the PS Card out of the radio. The hardest part is to find the green print connectors made by winchester connector.
The type coding for male print connector is: 600-1-17P
Type coding for female connector is: 600-1-17S
From time to time these connectors are available in brand new condition on ebay.
When cable is ready, I show picture here.
Cheers,
John
DL9QQ
John DL9QQ
Re: PRC 80
Thanks John, that would be useful for many PRC-80 owners.
73,
Ugo IW1FQG
73,
Ugo IW1FQG
Re: PRC 80
Hi John,
Many thanks for your reply, my PS card was not faulty and it worked great unfortunately I connected the radio to 24V !!
I have never found the wiring diagram and I have to change electronic components recommended by CROSEM friends.
Do you have some advice?
I wait for your connector photos.
Best 73 de HB9EDT Michele
Many thanks for your reply, my PS card was not faulty and it worked great unfortunately I connected the radio to 24V !!
I have never found the wiring diagram and I have to change electronic components recommended by CROSEM friends.
Do you have some advice?
I wait for your connector photos.
Best 73 de HB9EDT Michele
HB9 EDT
Re: PRC 80
Salve,
now the self made service card is ready and the first measurements are done. I found some voltages are missing and now it is time to dig further in the ciruitry.
I will open up new thread about the repair of PRC80.
Cheers,
John
DL9QQ
Here a picture from the card
now the self made service card is ready and the first measurements are done. I found some voltages are missing and now it is time to dig further in the ciruitry.
I will open up new thread about the repair of PRC80.
Cheers,
John
DL9QQ
Here a picture from the card
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
John DL9QQ
Re: PRC 80
Hi John,
very very nice the work you did!
Good luck continuing your measurements.
I haven't fixed my P.S. motherboard yet. hope to have time next week.
Best 73 de HB9EDT
Michele
very very nice the work you did!
Good luck continuing your measurements.
I haven't fixed my P.S. motherboard yet. hope to have time next week.
Best 73 de HB9EDT
Michele
HB9 EDT
Chi c’è in linea
Visitano il forum: Nessuno e 7 ospiti